Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
223 Chapter 32 Using The SMT
32.8 System Status
From the main menu, enter 4 and press [ENTER] to display the System Status menu as shown
next.
Figure 170 SMT: System Status
The following table describes the fields in this screen.
Relay Server IP
Address
This field is only visible when you enter R in the DHCP Service field.
If the VSG is set to function as a DHCP relay, enter the IP address of the DHCP
server.
Primary/
Secondary DNS IP
Address
These fields are visible when you enter S in the DHCP Service field.
Enter the IP address of the DNS server(s) in the Primary DNS IP Address and/or
Secondary DNS IP Address fields.
You must specify a DNS server.
At the “S)ave and return R)eturn without saving M)odify:” prompt, type S and press [ENTER] to save the
changes and return to the previous screen, type R and press [ENTER] to discard all changes and return
to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the
device when prompted
Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All
changes will be discarded.
Table 77 SMT: LAN Configuration (continued)
FIELD DESCRIPTION
System Status
System Name :
Doamin Name :
Console Port Speed :9600
Web Server Port :80
E-Mail Server Redirect :
WAN Configuration
WAN Type? (D/S/P/T) :DHCP Client
IP Address :172.21.3.66
Subnet Mask :255.255.0.0
Gateway :172.21.0.254
Primary DNS Server :172.20.0.63
Secondary DNS Server :172.20.0.27
DHCP Configuration
DHCP Service? (D/R/S) :Disable
Press any key to return.
Table 78 SMT: System Status
FIELD DESCRIPTION
System Name This field displays the name of the VSG for identification purposes.
Domain Name This field displays the domain name.