Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
219 Chapter 32 Using The SMT
The follow table describes the fields in this menu.
32.6.2 WAN Type: PPPoE
To activate PPPoE support on the VSG, enter P in the WAN Type field to display the WAN
Configuration screen as shown next. Refer to the related web configurator section for
background information.
Figure 167 SMT: WAN Configuration: PPPoE
Table 74 SMT: WAN Configuration: Static or Dynamic IP Address
FIELD DESCRIPTION
WAN Type? (D/S/
P/T)
Enter D (Dynamic) to set the VSG to dynamically obtain an IP address and other
network information (IP address, DNS information etc.) from a DHCP server on the
WAN network. This is the default setting.
Enter S (Static) to set the VSG to use a static (or fixed) IP address. Then set the
following fields.
IP Address This field is available when you select S in the WAN Mode field.
Enter the static IP address assigned to you by your ISP or network administrator.
Subnet Mask This field is available when you select D in the WAN Mode field.
Enter the subnet mask depending on your network needs. The default is
255.255.255.0. Refer to Appendix H on page 268 if you are implementing
subnetting.
Default Gateway Enter the IP address of the default gateway.
Primary/
Secondary DNS IP
Address
Enter the IP address of the DNS server(s) in the Primary DNS IP Address and/or
Secondary DNS IP Address fields.
The default primary DNS server IP address is 168.95.1.1.
You must specify a DNS server if you set the VSG to use a static WAN IP address.
At the “S)ave and return R)eturn without saving M)odify:” prompt, type S and press [ENTER] to save the
changes and return to the previous screen, type R and press [ENTER] to discard all changes and return
to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the
device when prompted
Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All
changes will be discarded.
WAN Configuration
WAN Type? (D/S/P/T) :P
Username :
Password :
Connect Setting? (C/K) :C
Max idle Time(Min) :10
Optional Setting
Service name :
PPP MTU Setting :1492
TCP MSS setting :1452