Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
Chapter 32 Using The SMT 218
32.6 WAN Configuration
From the main menu, type 1 and press [ENTER] to display the System Configuration menu.
The WAN Configuration menu varies depending on the selection in the WAN Typ e field.
Refer to Chapter 6 on page 60 for background information.
32.6.1 WAN Type: Static/Dynamic
You can set the VSG to use a static (fixed) or dynamic IP address.
Figure 166 SMT: WAN Configuration: Static/Dynamic
Web Server Port Specify the port number of the embedded web server on the VSG to access the
web configurator. The default port number is 80.
Enter a number between 8010 and 8060 to access the web configurator behind a
NAT-enabled network.
If you enter a number between 8010 and 8060, you need to append the port
number to the WAN or LAN port IP address to access the web configurator. For
example, if you enter “8010” as the web server port number, then you must enter
“http://www.192.168.1.1:8010” where 192.168.1.1 is the WAN or LAN port IP
address.
E-mail Server
Redirect
Enter the IP address or domain name of the e-mail server to which the VSG
forwards e-mail. This field should be configured if the e-mail server is behind a
firewall or on a NAT-enabled network.
At the “S)ave and return R)eturn without saving M)odify:” prompt, type S and press [ENTER] to save the
changes and return to the previous screen, type R and press [ENTER] to discard all changes and return
to the previous screen or type M and press [ENTER] to continue configuring the fields. Restart the
device when prompted
Press [ESC] and enter Y to stop any actions in the current screen and return to the previous screen. All
changes will be discarded.
Table 73 SMT: System Configuration (continued)
FIELD DESCRIPTION
WAN Configuration
WAN Type? (D/S/P/T) :S
IP Address :192.168.1.1
Subnet Mask :255.255.255.0
Gateway :192.168.1.254
Primary DNS Server :168.95.1.1
Secondary DNS Server :