Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
191 Chapter 28 System Status
• To directly access the LAN device, enter the WAN IP address of your VSG and the virtual
port number of the LAN device separated by a colon. For example, enter “http://
192.168.1.1:60001” where 192.168.1.1 is the WAN IP address of the VSG. The login
screen of the LAN device management interface should display.
28.8 Billing Log
Click System Status and Billing Log in the navigation panel to display the screen as shown.
Refer to Section 28.8.1 on page 192 for information on backing up the billing logs to a
computer.
Figure 128 System Status: Billing Log
The following table describes the labels in this screen.
Table 67 System Status: Billing Log
LABEL DESCRIPTION
Refresh Click Refresh to update the screen.
Export to Txt File Click Export to File to back the billing logs. Refer to Section 28.8.1 on page 192 for
instructions.
Clear Log Click Clear Log to clear all log entries.
No This field displays the index number of the entry.
Username/
Location
This field displays the user name or the room number (for Dynamic, PMS or Static
accounts only).
Billing Profile This field displays the name of the billing profile an account is using.
Log Time This field displays the time the subscriber logged in using the account.
Usage Time This field displays the time period allocated for an account.
Bill This field displays the amount of money charged for the time unit(s) purchased.
Charge from This field displays the type of the account billing (Dynamic, PMS or Static).
Status This field displays the billing status or account status.
Go .. page Select a page number from the drop-down list box to display the selected page.
First Click First to go to the first page.
Previous Click Previous to return to the previous page.