Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
163 Chapter 21 LAN Devices
You can also access the LAN devices through the VSG web configurator, refer to Section
28.7.1 on page 190 for more information.
21.2.2 Specifying an Inside Server Example
Let’s say you have a web server behind the VSG as shown in the next figure.
Figure 108 LAN Device Remote Management Example 2
In the LAN Device Management screen, you map virtual port 60001 to the server port (80) on
the web server.
Figure 109 LAN Devices: Example 2
To access an inside server on the LAN, enter the WAN IP address of your VSG and the virtual
port number of the inside server separated by a colon. In this example, to access the web
server, enter “http:// 192.168.1.1:9602” where 192.168.1.1 is the WAN IP address of the VSG.
You can also access the server by entering the domain name provided that you specified a
DNS server on the VSG. Enter the domain name and the virtual port number separated by a
colon, for example, http://www.domainName:60001.
You can also access the LAN devices through the VSG web configurator, refer to Section
28.7.1 on page 190 for more information.