Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
Chapter 20 Privilege User 158
CHAPTER 20
Privilege User
This chapter shows how to set the VSG to allow computers with the specified IP addresses to
access the Session List screen.
20.1 Privilege User Setup
The VSG allows specified computer(s) to access the Session List screen without having to log
in first. This allows administrators, network operators or supervisors to view the current
connection information on the VSG instantly without having to enter the user name and
password and navigating to the screen.
Click Advanced Settings and Privilege User to display the configuration screen.
Figure 103 Privilege User
The following table describes the fields in this screen.
Table 50 Privilege User
FIELD DESCRIPTION
Disable Select Disable to deactivate this feature. You need to log into the web configurator
first to view the Session List screen.
Enable Select Enable to allow the computer(s) with the specified IP address(es) to access
the Session List screen without logging in. Set the IP address(es) in the fields
below.
Start IP Enter the IP address in dotted decimal notation. For example, 10.59.1.10.
End IP If you want to specify one IP address, enter the same IP address as in the Start IP
field.
If you want to specify a range of IP addresses, enter the last IP address in the
range.
Add to List Click Add to List to save the settings to the table below.
No. This read-only field displays the index number of an entry.