Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
Chapter 13 Port-Location Mapping 114
Batch Create Set the related fields to create a specified number of port-location mappings.
Location ID From Enter an identity (up to 20 characters) of the first location for a mapping. This
field must match the VLAN ID of a port.
Port ID From Enter the an ID number (between 1 and 999999) of the starting port for this
mapping. This is the location ID number you set in the PMS.
Batch Numbers Specify the number of port-location mappings you want to create at a time.
Status Select No Charge if you don’t want to bill a subscriber accessing the Internet
at this port location.
Select Charge for use to bill a subscriber accessing the Internet at this port
location.
Select Blocked to stop any subscriber from accessing the Internet at this port
location.
Add to List Click Add to List to insert a new mapping rule.
Backup/ Restore You can back up or restore the port-location mappings.
Backup Click Backup to Local PC to save the current port-location mappings to a
computer.
To back up the current port-location mapping to a TFTP server, specify the IP
address of the TFTP server and the file name in the fields provided and click
Apply.
Restore Make sure you have previously backed up the port-location mapping.
Note: All current port-location mappings will be lost.
To restore from a local computer, specify the name and location of the backup
file or click Browse .. to locate it and click Apply.
To restore from a TFTP server, specify the IP address of the TFTP server and
the file name in the fields provided and click Apply.
Port-Location Mapping
List
This table displays a summary of each mapping rule. If applicable, click on a
heading to sort the entry.
Location ID This field displays the ID of a mapping rule.
Port ID This field displays the port ID.
Description This field displays a description.
Status This field displays the status (No Charge, Charge for use or Blocked) of a
mapping.
Delete Click Delete All to remove all accounts.
Click Delete to remove the selected account.
Go .. page Select a page number from the drop-down list box to display the selected page.
First Click First to go to the first page.
Previous Click Previous to return to the previous page.
Next Click Next to go to the next page.
End Click End to go to the last page.
Table 29 System Setting: Port-Location Mapping (continued)
LABEL DESCRIPTION