Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
Chapter 13 Port-Location Mapping 112
CHAPTER 13
Port-Location Mapping
This chapter describes the port-location mapping feature.
13.1 Port-Location Mapping Overview
With port-location mapping, you can map a port on the VSG or a VLAN-enabled switch to a
room number in a building (such as a hotel). This is done using IEEE802.1q VLAN tags. The
port-location mapping feature is used together with the PMS billing function so charges can be
done automatically.
13.2 Configuring Port-Location Mappings
Note: Make sure you select Built-in Authentication and Scenario A in the
Authentication screen (see Figure 32 on page 83) and configure the PMS
Configuration screen (see Figure 39 on page 92).
Click System Settings in the navigation panel and the Port-Location Mapping link to
display the screen as shown.