Unified Security Gateway User's Guide

Chapter 4 Wizard Setup
ZyWALL USG 300 User’s Guide
82
The ZyWALL applies the configuration settings.
Figure 21 PPPoE Encapsulation: Auto: Finish
You have set up your ZyWALL to access the Internet.
" If you have not already done so, you can register your ZyWALL with
myZyXEL.com and activate trials of services like IDP.
You can click Next and use the following screen to perform a basic registration (see Section
4.4 on page 91). If you want to do a more detailed registration or manage your account details,
click myZyXEL.com.
Alternatively, click Close to exit the wizard.
4.3.5 PPPoE: Static IP Address Assignment
If you select Static as the IP Address Assignment, the following screen displays.
Idle Timeout Type the time in seconds that elapses before the router automatically disconnects
from the PPPoE server. The default time is 100 seconds.
WAN IP Address
Assignments
WAN Interface This displays the identity of the interface you configure to connect with your ISP.
Zone This field displays to which security zone this interface and Internet connection will
belong.
IP Address The ISP will assign your WAN IP address automatically
Next Click Next to continue.
Table 9 PPPoE Encapsulation: Auto (continued)
LABEL DESCRIPTION