Unified Security Gateway User's Guide

Chapter 4 Wizard Setup
ZyWALL USG 300 User’s Guide
77
Figure 16 Internet Access: Step 1
The following table describes the labels in this screen.
4.3 Step 1 Internet Access
Encapsulation: Choose the Ethernet option when the WAN port is used as a regular
Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection according to the
information from your ISP.
WAN Interface: This is the interface you are configuring for Internet access.
Zone: Select the security zone to which you want this interface and Internet connection to
belong.
Table 7 Internet Access: Step 1
LABEL DESCRIPTION
ISP Parameters
Encapsulation Choose the Ethernet option when the WAN port is used as a regular Ethernet.
Otherwise, choose PPPoE or PPTP for a dial-up connection according to the
information from your ISP.
WAN IP Address
Assignments
WAN Interface This is the interface you are configuring for Internet access.
Zone Select the security zone to which you want this interface and Internet connection to
belong.
IP Address
Assignment
Select Auto If your ISP did not assign you a fixed IP address.
Select Static If the ISP assigned a fixed IP address.
Next Click Next to continue.