Unified Security Gateway User's Guide

Appendix B Log Descriptions
ZyWALL USG 300 User’s Guide
687
DDNS has been enabled
by Device-HA.
DDNS is enabled by Device-HA, because one of VRRP groups is
active.
Disable DDNS has
succeeded.
Disable DDNS.
Enable DDNS has
succeeded.
Enable DDNS.
DDNS profile %s has
been renamed as %s.
Rename DDNS profile, 1st %s is the original profile name, 2nd %s is
the new profile name.
DDNS profile %s has
been deleted.
Delete DDNS profile, %s is the profile name,
DDNS Initialization
has failed.
Initialize DDNS failed,
All DDNS profiles are
deleted
All DDNS profiles have been removed.
Table 249 Connectivity Check Logs
LOG MESSAGE DESCRIPTION
Cann't open link_up2 Can not recover routing status which is link-down.
Can not open %s.pid Can not open connectivity check process ID file.
%s: interface name
Can not open %s.arg Can not open configuration file for connectivity check process.
%s: interface name
The connectivity-
check is activate for
%s interface
The link status of interface is still activate after check of connectivity
check process.
%s: interface name
The connectivity-
check is fail for %s
interface
The link status of interface is fail after check of connectivity check
process.
%s: interface name
Can't get gateway IP
of %s interface
The connectivity check process can't get the gateway IP address for
the specified interface.
%s: interface name
Can't alloc memory The connectivity check process can't get memory from OS.
Can't load %s module The connectivity check process can't load module for check link-status.
%s: the connectivity module, currently only ICMP available.
Can't handle 'isalive'
function of %s module
The connectivity check process can't execute 'isalive' function from
module for check link-status.
%s: the connectivity module, currently only ICMP available.
Create socket error The connectivity check process can't get socket to send packet.
Can't get IP address
of %s interface
The connectivity check process can't get IP address of interface.
%s: interface name.
Can't get flags of %s
interface
The connectivity check process can't get interface configuration.
%s: interface name
Table 248 System Logs (continued)
LOG MESSAGE DESCRIPTION