Unified Security Gateway User's Guide

Chapter 37 Schedules
ZyWALL USG 300 User’s Guide
530
Figure 388 Object > Schedule > Edit (Recurring)
The Yea r, Month, and Day columns are not used in recurring schedules and are disabled in
this screen. The following table describes the remaining labels in this screen.
Table 175 Object > Schedule > Edit (Recurring)
LABEL DESCRIPTION
Configuration
Name Type the name used to refer to the recurring schedule. You may use 1-31
alphanumeric characters, underscores(
_), or dashes (-), but the first character
cannot be a number. This value is case-sensitive.
Date Time
Start Type the hour and minute when the schedule begins each day.
Year - disabled
Month - disabled
Day - disabled
hour - 0 - 23
Minute - 0 - 59
The Hour and Minute fields are both required.
To set all day (24 hours), configure the start hour and minute both to 0.
Stop Type the hour and minute when the schedule ends each day.
Year - disabled
Month - disabled
Day - disabled
Hour - 0 - 23
Minute - 0 - 59
The Hour and Minute fields are both required.
To set all day (24 hours), configure the stop hour to 23 and minute to 59.
Weekly
Week Days Select each day of the week the recurring schedule is effective.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving your changes.