Unified Security Gateway User's Guide

Chapter 35 Addresses
ZyWALL USG 300 User’s Guide
518
The following table describes the labels in this screen. See Section 35.3.2 on page 518 for
more information as well.
35.3.2 Address Group Add/Edit
The Address Group Add/Edit screen allows you to create a new address group or edit an
existing one. To access this screen, go to the Address Group screen (see Section 35.3.1 on
page 517), and click either the Add icon or an Edit icon.
Figure 381 Object > Address > Address Group > Add
The following table describes the labels in this screen.
Table 167 Object > Address > Address Group
LABEL DESCRIPTION
# This field is a sequential value, and it is not associated with a specific address
group.
Name This field displays the name of each address group.
Description This field displays the description of each address group, if any.
Add icon This column provides icons to add, edit, and remove address groups.
To add an address group, click the Add icon at the top of the column. The Address
Group Add/Edit screen appears.
To edit an address group, click the Edit icon next to the address group. The
Address Group Add/Edit screen appears.
To delete an address group, click on the Remove icon next to the address group.
The web configurator confirms that you want to delete the address group.
Table 168 Object > Address > Address Group > Add
LABEL DESCRIPTION
Name Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
Description This field displays the description of each address group, if any. You can use up to
60 characters, punctuation marks, and spaces.