Unified Security Gateway User's Guide

ZyWALL USG 300 User’s Guide
125
CHAPTER 6
Tutorials
This chapter provides some examples of using the web configurator to set up features in the
ZyWALL. See also Chapter 26 on page 351 for an example of configuring L2TP.
6.1 Interfaces and Zones
The following example shows how to use port grouping, Ethernet interfaces, trunks, and zones
to set up the following configuration.
In this example, ge2 does not have any physical ports assigned to it. The example begins with
the default interface configuration.
6.1.1 Set up Port Grouping
This example creates a port group in ge1 by adding physical port 2 to representative interface
ge1. There are no existing port groups.
1 Click Network > Interface > Port Grouping. The following screen appears.
Table 29 Interfaces and Zones Example
PHYSICAL PORT
ETHERNET
INTERFACE
SETTINGS TRUNK ZONE
1 ge1 192.168.1.1/24,
DHCP server
--- LAN
2 ge1 --- --- ---
3 ge3 DHCP client WAN_TRUNK WAN
4 ge4 172.23.37.240/24 WAN_TRUNK WAN
5 ge5 10.0.0.1/24,
DHCP server
--- DMZ