Unified Security Gateway User's Guide

ZyWALL USG 1000 User’s Guide
657
APPENDIX A
Product Specifications
The following specifications are subject to change without notice. See Chapter 2 on page 57
for a general overview of key features.
This table provides basic device specifications.
This table provides hardware specifications.
This table gives details about the ZyWALL’s features.
Table 231 Default Login Information
ATTRIBUTE SPECIFICATION
Default IP Address (ge1) 192.168.1.1
Default Subnet Mask
(ge1)
255.255.255.0 (24 bits)
Default Password 1234
Table 232 Hardware Specifications
FEATURE SPECIFICATION
Number of MAC addresses 5
Ethernet Interfaces Number of Ethernet interfaces: 5
All Ethernet interfaces are Gigabit Ethernet, full duplex RJ-45
connectors, auto-negotiation, auto-MDI/MDIX (auto-crossover)
Management interface RS-232, DB9F connector
AUX port RS-232, DB9M connector
USB 2, 2.0 plug and play (reserved for future use)
HDD Slot for an optional 2.5” IDE hard drive (reserved for future use)
Extension Card Slot Slot for optional hardware accessories (reserved for future use)
Power Requirements 100-240 V AC, 50/60 Hz, 1 A Max
Operating Environment Temperature: 0 C to 40 C
Humidity: 5% to 90% (non-condensing )
Storage Environment Temperature: -30 C to 60 C
Humidity: 5% to 90% (non-condensing )
MTBF Mean Time Between Failures: 51,611 hours
Dimensions 430.7 (W) x 292.0 (D) x 43.5 (H) mm
Weight 4.7 kg
Rack-mounting Rack-mountable (rack-mount kit included)