Network Router User Manual

Fax Operation 65
Command Value Description
and reported using the +FVO response.
+FIP Initialize facsimile parameters to factory
default.
+FIS=vr,br,wd
,ln,df,ec,bf,st
Current session parameter. refer to
+FDCC Class 2 command in previous
section parameter settings.
+FKS Session termination command.
+FLI="string" Local ID string parameter.
+FLO=n Flow control options:
n=0 No flow control.
n=1 Set XON/XOFF software flow control.
n=2 Set CTS/RTS hardware flow control.
+FLP=n Document for polling command:
n=0 The DTE has no document for polling.
n=1 Indicated document available for polling.
+FMI? Request DCE manufacturer
identification.
+FMM? Request DCE model identification.
+FMR? Request DCE revision identification.
+FMS=n Minimum phase C speed parameter. refer
to +FMINSP Class 2 command in
previos section for parameter settings.
+FNR=rpr,
tpr,idr,nsr
Negotiation message reporting control
parameters:
rpr=0 Receiver parameters are not reported.
+FIS: and +FTC: response reports are
suppressed.
rpr=1 Receiver parameters are reported. +FIS:
and +FTC: response reports are
generated.
tpr=0 Transmitter Parameters are not reported.
+FCS: response reports are suppressed.