Network Router User Manual

64 Fax Operation
Command Value Description
tq=0 DCE Transmit Copy Quality Checking
disabled.
tq=1 DCE Transmit Copy Quality Checking
enabled.
tq=2 DCE Transmit Copy Quality Correction
enabled.
+FCR=n "Capability to receive" parameter
n=0 DCE will not receive message or poll a
remote device.
n=1 DCE receives message data or polls a
remote device
+FCT=n 0-255 DTE phase C time-out parameter. n=0-
255, 1s units.
+FDR Receive phase C data command initiates
document reception
+FDT Transmit phase C data command:
releases the DCE to proceed with
negotiation
+FEA=n Phase C received EOL alignment
parameter
n=0 Determine that T.4 EOL patterns are bit
aligned (as received).
n=1 Determine that the last received bits of
T.4 EOL patterns are byte aligned by the
DCE, with necessary zero fill bits
inserted.
+FIE=n Procedure interrupt parameter
n=0 Procedure interrupt requests from the
remote station are ignored, and not
reported to the DTE.
n=1 Procedure interrupt requests from the
remote station are accepted, negotiated