Network Router User Manual

Fax Operation 63
Class 2.0 Command Set
Command Syntax Description
+<command>=<value> Execute a command or set a parameter.
+<command>=? Read permissible settings.
+<command>? Read the current setting.
Supported Commands
Command Value Description
+FAA=n Auto-answer mode parameter:
n=0 DCE answers as set by +FCLASS.
n=1 DCE answers and auto-determines call
type.
+FBO=n Phase C data bit order:
n=0 Select direct bit order.
n=1 Select reversed bit order in receiving
mode for phase C data.
+FBS? Buffer size parameter; read only.
+FCC=vr,br,w
d,ln,df,ec,bf,st
DCE capability parameter. Refer to
+FDCC command in Class 2 for parameter
settings.
+FCLASS=n Service class selection. Refer to
+FCLASS Class 1 command in previous
section.
+FCO DCE response fax connection made.
+FCQ=<rq>,
<tq>
Copy quality check capability parameter
rq=0 DCE Receive Copy Quality Checking
disabled.
rq=1 DCE Receive Copy Quality Checking
enabled.
rq=2 DCE Receive Copy Quality Correction
enabled.