Network Router User Manual

Special Functions 45
Brent Harper
RING
In the multiple message format, if the caller’s number and name are
available, the ring message will display both:
RING
TIME: MM-DD hh:mm
CALLER NUMBER: <Caller_ID>
CALLER NAME: <Caller_Name>
RING
Here is an example:
RING
TIME: 04-28 12:30
CALLER NUMBER: 7135551414
CALLER NAME: Jordan Chu
RING
If the caller number and name are not available, the ring message
will appear as follows:
RING
TIME: 04-28 12:30
REASON FOR NO NUMBER: OUT_OF_AREA
REASON FOR NO NAME: PRIVACY
RING
The last CND message that the modem received can be displayed
by using the AT*T command.
Setting S48.0=1 will cause the modem to report CND information
in its ASCII coded hexadecimal raw data format. The DTE
software is responsible for explaining the data.