Network Router User Manual

Status Registers & Result Codes 105
Command bit dec hex Function and description Ref.
7 128 80 Ignore calling tone, not to be
used as fax detection.
S42= bit dec hex Bit mapped register. +000
1 2 2 Enables throughput
averaging.
2 4 4 CND message will be forced
on even if AT02 is set.
3 8 8 Disable escape sequence
code in answer mode.
4 16 10 Disable V.17, 14,400 Fax in
calling mode, no effect to
answering mode &N32
5 32 20 Disable Data/Voice button
6 64 40 Disable ‘RINGING’ result
code.
Xn
7 128 80 DCD forced on but pulse off
for 0.5 seconds at carrier
loss.
&C0
S43= bit dec hex Bit mapped register. +000
0 1 1 Disable ZyXEL 16800 in
Multi-Auto mode.
&N0
1 2 2 Disable ZyXEL 19200 in
Multi-Auto mode.
&N0
2 4 4 Disable cellular mode
automatic transmit power
adjustment (see also S49b0-
3).
&N0
3 0 0 Enable cellular mode in
Multi-Auto mode.
&N0
8 8 Disable cellular mode in
Multi-Auto.
&N0
6 64 40 Enable 1.5 sec, pause