Network Router User Manual

104 Status Registers & Result Codes
Command bit dec hex Function and description Ref.
+FCON at current DTE,
shift to 19,200 when
entering into the next phase.
S40= bit dec hex Bit mapped register. +000
1 2 2 No result code displayed in
answer mode.
Q2
2 4 Enables caller ID detection
3 8 Enables type 1 ring
detection.
4 16 Enables type 2 ring
detection.
5 32 Enables type 3 ring
detection.
6 64 Enables type 4 ring
detection.
S41= bit dec hex Bit mapped register. +000
0 1 1 Special MNP compatibility
(see also S27.0, S38.5).
&Kn
2 4 4 Disable retrain abort, up to 5
min. for special satellite line
condition.
S27.6
*n
3 8 8 Enable CCITT signals 140
and 141 on EIA-232D
interface.
4 16 10 In X2-X7 setting, modem
waits for S6 seconds before
dialing and ignores dial tone
detection.
5 32 20 DSR follows DCD and
pulses for 0.5 sec DCD on-
off transition.
&Sn
6 64 40 Force S0>=2. S0