Network Router User Manual

Status Registers & Result Codes 101
Command bit dec hex Function and description Ref.
bps communication.
S29= 0-49 0-31 Set default dial phone
number pointer, use
AT&Zn=s to store phone
numbers.
+000
*D
S31= 0-
255
0-FF Holds the ASCII decimal
value of the XON.
+017
S32= 0-
255
0-FF Holds the ASCII decimal
value of the XOFF.
+019
S35= bit dec hex Bit mapped register.
0 1 1 Use CELL 4800T trells
coded 4800 for V.32 4800
(available with cellular mode
only).
1 2 2 Disable aborting from
terminal during modem
handshaking.
2 4 4 V.26 alternative A. (see also
‘&N11’).
3 8 8 Add 12 dBm attenuation to
the leased line transmission
power.
4 16 10 When Data/Voice with is
pressed, modem will dial the
default number.
*Dn
S29
5 32 20 Enable Selective Reject in
V.42 (Default).
6 64 40 Enable password protection
to profile saving. When
‘AT&W0’ is issued, and
profile 0 in the NVRAM has
this bit set, the supervisory
*W0