Network Router User Manual

Status Registers & Result Codes 97
Command bit dec hex Function and description Ref.
25 19 62400 bps
26 1A 41600 bps
27 1B 31200 bps
28 1C 24960 bps
29 1D 20800 bps
46 2E 921600 bps
Note: Only the speeds up to S20=15 are supported by auto speed
detection.
S21= bit dec hex Bit mapped register.
0 0 0 Maintain non-error control
connection when modem
error control handshake
fails.
*E0
1 1 Drop connection when
modem error control
handshake fails.
*E1
1-2 0 0 Speaker always OFF. M0
2 2 Speaker ON until carrier is
detected (default).
M1*
4 4 Speaker always ON. M2
6 6 Speaker ON after last digit is
dialed out until carrier
detected.
M3
3 0 0 DSR always ON. &S0
8 8 According to CCITT (see
also S44.4, S41.5).
&S1
4 0 0 CD always ON. &C0
16 10 CD tracks presence of data
carrier (see also S38.3).
&C1
5 0 0 CTS Follows RTS in
synchronous mode.
Response delay set in S26.
&R0