Network Router User Manual

Status Registers & Result Codes 95
Command bit dec hex Function and description Ref.
96 60 Profile 3 as active settings
after power on.
Z3
128 80 * Factory default as active
settings after power on
Z4
S16= dec hex Test status register. +000
0 0 No test in progress. &T0
1 1 Loop-back test in progress &T1
3 3 Local Digital Loop-back test
in process.
&T3
6 6 Remote Digital Loop-back
test in process.
&T6
7 7 Remote Digital Loop-back
with self-test in process.
&T7
8 8 Analog Loop-back with self
test in progress.
&T8
S17= bit dec hex Bit-mapped register. +018
4-1 0-30 0-1E Set leased line transmit
power level from 0 to -15
dBm. (See also S35b3)
(Default *P9).
*Pn
5 0 0 Normal dial (Default). D
32 20 Reverse dial, go on-line in
answer mode.
DR
7,6 0 0 AT Commands set (Default). *I0
64 40 V.25bis command set. *I1
128 80 Dumb mode (no command
accepted).
*I2
S18= dec hex Force modem to fix baud
rate when answering.
+000
0 * 0 Disable fixed baud function.
1-46 1-2E Enable baud rate to be fixed
when answering. Baud rate