Network Router User Manual

90 AT Command Set Summaries
Command Options Function & Description Ref.
*Fn Remote configuration enable. S36.0
*F0 * Deny remote configuration.
*F1 Accept remote configuration
(Remote Digital Loop-back must be
granted, &T4).
*Gn Security function selection. S36.5-7
*G0 * Disable security function
*G1 Enable type 1 security, with
password check (ZyXEL to ZyXEL
only).
*G2 Enable type 1 security, with
password check and call back
(ZyXEL to ZyXEL only).
*G3 Enable type 2 security, with
password check.
*G4 Enable type 2 security, with
password check and call back.
*G5 Enable type 2 security, with
password check and call back,
remote user enters the call back
number.
*Hn n=0-49 Modify user password table at
location n.
*HS Modify supervisory password
(Default: “ZyXEL”)
*In Command set selection. S17.6-7
*I0 * AT command set.
*I1 V.25bis command set.
*I2 Dumb mode.
*Mn Leased line auto-handshake mode
selection.
S14.0
*M0 Set to Originate mode.