User manual

Note:
 This camera uses a First In, First Out storage method. When the SD
card is full, the oldest files will be automatically rewritten.
 If you want to record video clips of detected motion to the SD card,
you’ll need to set a motion detection region before setting up event-based
recording.
5.8 Recording History
The Recording History page allows users to manage video clips that have been recorded
by the camera. You’ll see a playback menu as displayed below.
.The following table describes the labels found within this screen.
Label Description
Playback Click to download then play the selected
clip
Download Click to download the selected clip to your
PC
Protect/UnProtect Protected files will not be erased. Click this
button to Protect or remove protection from
selected clips
Select All/Deselect/Delete File Management
5.9 Date
This page allows you to set the current Date/Time information stored in your camera, as
well as set time zones, enable or disable daylight savings time, synchronize the clock of
your camera system with your PC, and obtain time information from an NTP server. To
access this page, navigate to [Setup] > [Date]. The following page will appear.