User manual

The following table describes the labels found within this screen.
Label Description
FTP Address Enter the address of your FTP server
FTP Port Enter the port of your FTP server
User Name Enter your user name here
Password Enter your Password here
Upload Path Enter the file path of the folder where you
want snapshots to be stored.
Save Save settings
Clear Clear settings
Cancel Cancel
5.6.1.3 Image Server
This page allows you to set the file name that will be used when snapshots are taken. To
access this page, navigate to [Setup] > [Event Setup] > [Event Server Setup] > [Image].
The following screen will appear.
5.6.1.4 Notify Server
This page allows you to input a message that notifies a server that an event was triggered.
This feature is meant to be integrated with video management software.
5.6.1.5 HTTP Server