User manual

On this page, you can set the camera to obtain an IP address via DHCP (recommended),
use a manual IP address, or obtain an IP address via PPPoE, for which a valid user name
and password are required.
5.5.2 Wireless Settings
If you have installed the ZyXEL wireless adapter, you’ll be able to set up a wireless
connection from this page. To connect wirelessly, check the [Use Wireless First] box to
give priority to wireless connections when the LAN network is also connected. You will
also be able to choose to connect via DHCP or a static IP address and specific access
point.
To access the wireless settings, navigate to Settings, then to Network on the side panel,
then select Wireless from the dropdown menu. The following screen will appear.