User manual

5 Configuration
5.1 Video Settings
The Video Settings screen consists of all the basic settings options. To access the main
setup page, click on the setup button at the top right in the live view screen. You can
configure detailed settings of your IP camera here.
The following table describes the labels found on this screen.
Label Description
Turbo Picture This mode provides best video quality, but frame rate
is limited to 15.
Motion Adaptive This mode provides 30FPS at a lower resolution
Enable 2
n
d
Stream This enables the second stream for viewing from
mobile devices.
Stream-1/Stream-2
Resolution Resolution settings. Options are QQVGA, QVGA,
VGA, and 1080x720 (720p)
Codec The codec used to encode video. MPEG-4 can be
viewed from external devices, while H.264 uses less
bandwidth.