User manual

4.3.3 Accessing via 3GPP Mobile Phone
You can access your IP camera via 3GPP-compatible mobile phones provided your
camera has a stable internet connection, and your mobile devices has a stable connection
to the 3G network. There are also several steps which must be taken to ensure 3GPP
functionality.
1) The second video stream (located at [Setup] > [Video Settings]) must be enabled,
with resolution set to QQVGA, FPS set to 5, codec set to MPEG-4, and quality set
to medium.
2) DDNS functionality must be enabled, with a valid DDNS address.
3) An active internet connection must be available for both the IP camera and the
mobile device.
4) Port forwarding must be properly configured (as detailed in section 4.2)
Having taken the above steps, enter the camera’s RTSP streaming address into the
address field of your mobile web browser. The RTSP address will take the form of
“rtsp://ipcamera-ip/medias2”, wherein “ipcamera-ip” is the IP address located above the
[save] and [reset] buttons in [Setup] > [Video Settings].