User manual

3 Installation
3.1 Connecting your IPC-3605N
The picture below illustrates the basic connection of your IPC-3605N camera:
The following table describes the numbered items:
Number Contents
Ethernet cable from PC to hub/router.
Ethernet cable from router to camera. Use the bundled Ethernet cable to
connect the LAN port of the IP camera to the LAN port of your hub/router.
Wireless adapter (optional). If you’re using the USB Wi-Fi adapter, plug it into
the USB port on your camera for wireless reception.
Power: Attach the power adapter to the camera’s power port, and connect the
plug to a power outlet.
Important!
 The Camera’s USB port only supports the bundled ZyXEL Wireless adapter.
 After unplugging the camera’s power cable, wait at least 4 seconds before
restoring power to the camera.