- ZyXEL Wireless Router Quick Start Guide

ENGLISH
5
The LEDs
2 Accessing the Web Configurator
1 Launch your web browser. Enter “192.168.1.1” as the web site address.
Note: If the login screen does not display, check your browser’s security settings (see
Troubleshooting for details) or make sure your computer is set to receive an IP address
dynamically (see Set Up Your Computer’s IP Address).
Look at the front panel LEDs. When you
connect the power, the PWR LED blinks and
stays on once the device is ready. About 30
seconds later, the A/G LED also comes on.
The LAN and WAN LEDs turn on if the
corresponding connections are properly made.
2 The Password window displays. Enter the
password (“1234” is the default) and click Login.
3 Change the password in the screen that follows
and click Apply.
4 Click Go to Wizard setup to set up your P-335U for
the first time.