- ZyXEL Wireless Internet Sharing Router User's Guide

ZyXEL P-330W User’s Guide
81 Chapter 6 Advanced Options
Figure 48 Advanced: WAN PPPoE Encapsulation
The following table describes the labels in this screen.
Table 35 PPPoE Encapsulation
LABEL DESCRIPTION
WAN Access
Type
You must choose the PPPoE option when the WAN port is used with PPPoE.
User Name Type the User Name given to you by your ISP.
Password Type the password associated with the User Name above.
Service Name Type the PPPoE service name provided to you. PPPoE uses a service name to
identify and reach the PPPOE server.
Connection Type Select Continuous if you do not want the connection to time out.
Select Connect On Demand if you want to only connect when you are sending
data.
Select Manual if you do not want manually log the P-330W in via the GUI.
Idle Time The amount of time before the PPPoE session times out and drops connection.
MTU Size Enter in the maximum MTU (packet size) here.
Attain DNS
Automatically
Select this if your ISP assigns you a DNS server at the same time it assigns you an
IP Address.