- ZyXEL Wireless Internet Sharing Router User's Guide

ZyXEL P-330W User’s Guide
Chapter 5 Wireless 58
Figure 31 Wireless Security Setup: WEP Encryption
The following table describes the wireless LAN security labels in this screen
Table 22 Wireless Security Setup: WEP Encryption
LABEL DESCRIPTION
Key Length Select 64-bit WEP or 128-bit WEP.
Key Format ASCII: Select this option in order to enter ASCII characters as WEP key.
Hex: Select this option in order to enter hexadecimal characters as a WEP key.
Default Tx Key You must configure at least one key, only one key can be activated at any one time.
The default key is key 1.
Encryption Key
1 to 4
The WEP keys are used to encrypt data. Both the P-330W and the wireless stations
must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
Passphrase Enter a Passphrase (up to 32 printable characters) and clicking Generate WEP KEY.
The P-330W automatically generates a WEP key.
Save Click Save to save your changes back to the P-330W.
Close Click Close to close this window.
Reset Click Reset to reload the previous configuration for this screen.