- ZyXEL Wireless Internet Sharing Router User's Guide

ZyXEL P-330W User’s Guide
57 Chapter 5 Wireless
Figure 30 Wireless Security Setup: WEP Encryption
The following table describes the wireless LAN security labels in this screen
Click SET WEP KEY to configure WEP encryption.
Table 21 Wireless Security Setup: Static WEP Encryption
LABEL DESCRIPTION
Encryption Choose WEP from the drop-down list box.
Set WEP Key Click this to configure WEP without 802.1x.
Use 802.1x
Authentication
Mark the check box here to use 802.1x authentication.
WEP
Encryption
Select 64-bit WEP or 128-bit WEP. Used only when using 802.1x authentication.
Authentication RADIUS Server
Port The port number on the RADIUS server.
IP Address
Enter the IP address of the RADIUS server.
Password
Enter the password (shared secret) for the RADIUS server.
Save Click Save to save your changes back to the P-330W.
Reset Click Reset to reload the previous configuration for this screen.