- ZyXEL Wireless LAN Router Compact Guide

Prestige 652H/HW
28
Table 9 VPN Summary
LABEL DESCRIPTION
Remote Address This is the IP address(es) of computer(s) on the remote network behind the remote
IPSec router.
This field displays N/A when the Secure Gateway IP Address field displays 0.0.0.0. In
this case only the remote IPSec router can initiate the VPN.
The same (static) IP address is displayed twice when the Remote Address Type field
in the Configure-IKE (or Manual) screen is configured to Single Address.
The beginning and ending (static) IP addresses, in a range of computers are displayed
when the Remote Address Type field in the Configure-IKE (or Manual) screen is
configured to Range Address.
A (static) IP address and a subnet mask are displayed when the Remote Address
Type field in the Configure-IKE (or Manual) screen is configured to Subnet Address.
Encap This field displays Tunnel or Transport mode (Tunnel is the default selection).
IPSec Algorithm This field displays the security protocols used for an SA.
Both AH and ESP increase Prestige processing requirements and communications
latency (delay).
Secure Gateway
IP
This is the static WAN IP address or URL of the remote IPSec router. This field displays
0.0.0.0 when you configure the Secure Gateway IP Address field in the Configure-
IKE screen to 0.0.0.0.
5.11 Configuring VPN Policies
Click an IPSec rule’s index number to open the VPN IKE screen where you can configure the
IPSec rule.