User`s guide

Chapter 5 WAN Setup

P-660HN-Fx User’s Guide

5.3.2 Configuring More Connections Advanced Setup

Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the Advanced

Setup button in the More Connections Edit screen. The screen appears as shown.

Figure 35 Network > WAN > More Connections: Edit: Advanced Setup

The following table describes the labels in this screen.

Apply Click this to save your changes.

Cancel Click this to restore your previously saved settings.

Advanced Setup Click this to display the More Connections Advanced Setup screen and

edit more details of your WAN setup.

Table 20 Network > WAN > More Connections: Edit (continued)

LABEL DESCRIPTION

Table 21 Network > WAN > More Connections: Edit: Advanced Setup

LABEL DESCRIPTION

RIP & Multicast Setup This section is not available when you configure the ZyXEL Device to be in

bridge mode.

RIP Direction Select the RIP direction from None, Both, In Only and Out Only.

RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.

Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used

to establish membership in a multicast group. The ZyXEL Device supports

IGMP-v1, IGMP-v2 and IGMP-v3. Select None to disable it.

ATM QoS