User`s guide

Chapter 5 WAN Setup
P-660HN-Fx User’s Guide
75
5.3 The More Connections Screen
The ZyXEL Device allows you to configure more than one Internet access connection. To
configure additional Internet access connections click Network > WAN > More
Connections. The screen differs by the encapsulation you select. When you use the WAN >
Internet Access Setup screen to set up Internet access, you are configuring the first WAN
connection.
Figure 33 Network > WAN > More Connections
Protocol Filter Select the protocol filter(s) to control incoming traffic. You may choose up to 4
sets of filters.
You can configure packet filters in the Packet Filter screen. See Chapter 11 on
page 177 for more details.
Generic Filter Select the generic filter(s) to control incoming traffic. You may choose up to 4
sets of filters.
You can configure generic filters in the Packet Filter screen. See Chapter 11 on
page 177 for more details.
Outgoing Filter Sets
Protocol Filter Select the protocol filter(s) to control outgoing traffic. You may choose up to 4
sets of filters.
You can configure protocol filters in the Packet Filter screen. See Chapter 11 on
page 177 for more details.
Generic Filter Select the generic filter(s) to control outgoing traffic. You may choose up to 4
sets of filters.
You can configure generic filters in the Packet Filter screen. See Chapter 11 on
page 177 for more details.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 18 Network > WAN > Internet Access Setup: Advanced Setup (continued)
LABEL DESCRIPTION