User`s guide

Chapter 2 Introducing the Web Configurator
P-660HN-Fx User’s Guide
43
Firewall General Use this screen to activate/deactivate the firewall and the default action to
take on network traffic going in specific directions.
Rules This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Threshold Use this screen to configure the thresholds for determining when to drop
sessions that do not become fully established.
Content Filter Keyword Use this screen to block access to web sites containing certain keywords in
the URL.
Schedule Use this screen to set the days and times for your device to perform content
filtering.
Trusted Use this screen to exclude a range of users on the LAN from content
filtering.
Packet Filter Use this screen to configure the rules for protocol and generic filter sets.
Certificates My Certificates Use this screen to generate and export self-signed certificates or
certification requests and import the ZyXEL Device’s CA-signed certificates.
Trusted CAs Use this screen to save CA certificates to the ZyXEL Device.
Trusted Remote
Hosts
Use this screen to import self-signed certificates.
Directory
Servers
Use this screen to configure a list of addresses of directory servers (that
contain lists of valid and revoked certificates).
Advanced
Static Route Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
802.1Q/1P Group Setting Use this screen to activate 802.1Q/1P, specify the management VLAN
group, display the VLAN groups and configure the settings for each VLAN
group.
Port Setting Use this screen to configure the PVID and assign traffic priority for each
port.
QoS General Use this screen to enable QoS and traffic prioritizing, and configure
bandwidth management on the WAN.
Class Setup
Use this screen to define a classifier.
Monitor Use this screen to view each queue’s statistics.
Dynamic DNS This screen allows you to use a static hostname alias for a dynamic IP
address.
Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Telnet Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
FTP Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
SNMP Use this screen to configure your ZyXEL Device’s settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
ICMP Use this screen to set whether or not your device will respond to pings and
probes for services that you have not made available.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION