User`s guide

Chapter 15 Quality of Service (QoS)
P-660HN-Fx User’s Guide
234
15.4 The QoS Monitor Screen
Use this screen to view the ZyXEL Device’s QoS packet statistics. Click Advanced > QoS >
Monitor. The screen appears as shown.
Figure 141 Advanced > QoS > Monitor
The following table describes the labels in this screen.
Ethernet Priority Select this option and select a priority level (between 0 and 7) from the drop
down list box.
"0" is the lowest priority level and "7" is the highest.
VLAN ID Select this option and specify a VLAN ID number between 2 and 4094.
Physical Port Select this option and select a LAN port.
Remote Node Select this option and select a remote node from the drop down list box. When
the WAN type is Ethernet in the WAN > Internet Access Setup screen, you
can select WAN1 only.
Exclude Select this option to exclude the packets that match the specified criteria from
this classifier.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 85 Advanced > QoS > Class Setup: Edit (continued)
LABEL DESCRIPTION
Table 86 Advanced > QoS > Monitor
LABEL DESCRIPTION
Priority Queue This shows the priority queue number.
Traffic assigned to higher index queues gets through faster while traffic in lower
index queues is dropped if the network is congested.
Pass This shows how many packets mapped to this priority queue are transmitted
successfully.
Drop This shows how many packets mapped to this priority queue are dropped.
Poll Interval(s) Enter the time interval for refreshing statistics in this field.