User`s guide

Chapter 12 Certificates
P-660HN-Fx User’s Guide
204
12.5 The Directory Servers Screens
This screen displays a summary list of directory servers (that contain lists of valid and revoked
certificates) that have been saved into the ZyXEL Device. If you decide to have the ZyXEL
Device check incoming certificates against the issuing certification authority’s list of revoked
certificates, the ZyXEL Device first checks the server(s) listed in the CRL Distribution
Points field of the incoming certificate. If the certificate does not list a server or the listed
server is not available, the ZyXEL Device checks the servers listed here. Click Security >
Certificates > Directory Servers to open the Directory Servers screen.
Figure 118 Directory Servers
The following table describes the labels in this screen.
Apply Click this to save your changes. You can only change the name of the
certificate.
Cancel Click this to restore your previously saved settings.
Table 75 Trusted Remote Host Details (continued)
LABEL DESCRIPTION
Table 76 Directory Servers
LABEL DESCRIPTION
PKI Storage
Space in Use
This bar displays the percentage of the ZyXEL Device’s PKI storage space that is
currently in use. The bar turns from green to red when the maximum is being
approached. When the bar is red, you should consider deleting expired or
unnecessary certificates before adding more certificates.
# The index number of the directory server. The servers are listed in alphabetical
order.
Name This field displays the name used to identify this directory server.
Address This field displays the IP address or domain name of the directory server.
Port This field displays the port number that the directory server uses.
Protocol This field displays the protocol that the directory server uses.