User`s guide

Chapter 7 Wireless LAN
P-660HN-Fx User’s Guide
116
7.3.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP
screen. The following screen displays.
Figure 56 Network > Wireless LAN > More AP: Edit
The following table describes the fields in this screen.
SSID An SSID profile is the set of parameters relating to one of the ZyXEL Device’s
BSSs. The SSID (Service Set IDentifier) identifies the Service Set with which a
wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless
client scans for an AP to associate with, this is the name that is broadcast and seen
in the wireless client utility.
Security This field indicates the security mode of the SSID profile.
Modify Click the Edit icon to configure the SSID profile.
Click the Remove icon to delete the SSID profile.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 35 Network > Wireless LAN > More AP
LABEL DESCRIPTION
Table 36 Network > Wireless LAN > More AP: Edit
LABEL DESCRIPTION
Network Name (SSID) The SSID (Service Set IDentity) identifies the service set with which a wireless
device is associated. Enter a descriptive name (up to 32 printable 7-bit ASCII
characters) for the wireless LAN.
Note: If you are configuring the ZyXEL Device from a computer
connected to the wireless LAN and you change the
ZyXEL Device’s SSID or security settings, you will lose
your wireless connection when you press Apply to
confirm. You must then change the wireless settings of
your computer to match the ZyXEL Device’s new
settings.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a
station cannot obtain the SSID through scanning using a site survey tool.
Security Mode See Section 7.2 on page 107 for more details about this field.
MAC Filter This shows whether the wireless devices with the MAC addresses listed are
allowed or denied to access the ZyXEL Device using this SSID.