User`s guide

Chapter 7 Wireless LAN
P-660HN-Fx User’s Guide
115
The following table describes the labels in this screen.
7.3 The More AP Screen
This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the
ZyXEL Device.
Click Network > Wireless LAN > More AP. The following screen displays.
Figure 55 Network > Wireless LAN > More AP
The following table describes the labels in this screen.
Table 34 Network > Wireless LAN > AP: MAC Address Filter
LABEL DESCRIPTION
Active MAC
Filter
Select the check box to enable MAC address filtering.
Filter Action
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the ZyXEL Device. MAC addresses not listed will be
allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device. MAC addresses not listed will be
denied access to the ZyXEL Device.
Set
This is the index number of the MAC address.
MAC
Address
Enter the MAC addresses of the wireless devices that are allowed or denied access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 35 Network > Wireless LAN > More AP
LABEL DESCRIPTION
# This is the index number of each SSID profile.
Active Select the check box to activate an SSID profile.