User`s manual

P-660 Series Support Notes

Menu 11.1 - Remote Node Profile

Rem Node Name= CHT Route= IP

Active= Yes Bridge= No

Encapsulation= PPPoE Edit IP/Bridge= No

Multiplexing= LLC-based Edit ATM Options= No

Service Name= N/A Edit Advance Options= No

Incoming: Telco Option:

Rem Login= N/A Allocated Budget(min)= 0

Rem Password= N/A Period(hr)= 0

Outgoing: Schedule Sets= 1, 2, 3, 4

My Login= cso@hinet.net Nailed-Up Connection= No

My Password= ******* Session Options:

Authen= N/A Edit Filter Sets= No

Idle Timeout(sec)= 0

• Time Service in P-660

There is no RTC (Real-Time Clock) chip so the P-660 should launch a mechanism to

get current time and date from external server in boot time. Time service is

implemented by the Daytime protocol(RFC-867), Time protocol(RFC-868), and

NTP protocol(RFC-1305). You have to assign an IP address of a time server and

then, the P-660 will get the date, time, and time-zone information from this server.

Menu 24.10 - System Maintenance - Time and Date Setting

Use Time Server when Bootup= Daytime (RFC-867)

Time Server IP Address= 202.132.154.1

Current Time: 00 : 11 : 38

New Time (hh:mm:ss): 00 : 11 : 36

Current Date: 2000 - 01 - 01

New Date (yyyy-mm-dd): 2000 - 01 - 01

Time Zone= GMT+0800

Daylight Saving= No

Start Date (mm-dd): 01 - 00

End Date (mm-dd): 01 - 00

Press ENTER to Confirm or ESC to Cancel:

13. Using IP Multicast

• What is IP Multicast ?

Traditionally, IP packets are transmitted in two ways - unicast or broadcast. Multicast

is a third way to deliver IP packets to a group of hosts. Host groups are identified by