User`s manual

P-660 Series Support Notes

Configuration:

1. Active, use the space bar to turn on the syslog option.

2. Syslog IP Address, enter the IP address of the UNIX server that you wish to send

the syslog.

3. Log Facility, use the space bar to toggle between the 7 different local options.

4. Types, use the space bar to toggle the logs we are going to record.

UNIX Setup

1. Make sure that your syslog starts with -r argument.

-r, this option will enable the facility to receive message from the network using an

Internet domain socket with the syslog services. The default setting is not enabled.

2. Edit the file /etc/syslog.conf by adding the following line at the end of the

/etc/syslog.conf file.

local1.* /var/log/zyxel.log

Where /var/log/zyxel.log is the full path of the log file.

3. Restart syslogd.

ZyXEL Syslog Message Format

CDR

Call Detail Record (CDR) logs all data phone line activity if set to Yes.

Packet

triggered

The first 48 bytes or octets and protocol type of the triggering packet is sent to

the UNIX syslog server when this field is set to Yes.

Filter log

No filters are logged when this field is set to No. Filters with the individual

filter Log field set to Yes are logged when this field is set to Yes.

PPP log

PPP events are logged when this field is set to Yes.

1. CDR log(call messages)

Format:

sdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );

String = board xx line xx channel xx, call xx, str

board = the hardware board ID

line = the WAN ID in a board

channel = channel ID within the WAN

call = the call reference number which starts from 1 and increments by 1 for each new

call