User`s manual

P-660 Series Support Notes

Trusted Host= 192.168.1.33

Trap:

Community= public

Destination= 192.168.1.33

Press ENTER to Confirm or ESC to Cancel:

Key Settings:

Option Descriptions

Get

Community

Enter the correct Get Community. This Get Community must match the 'Get-'

and 'GetNext' community requested from the NMS. The default is 'public'.

Set

Community

Enter the correct Set Community. This Set Community must match the 'Set-

community requested from the NMS. The default is 'public'.

Trusted Host

Enter the IP address of the NMS. The P-660 will only respond to SNMP

messages coming from this IP address. If 0.0.0.0 is entered, the P-660 will

respond to all NMS managers.

Trap

Community

Enter the community name in each sent trap to the NMS. This Trap Community

must match what the NMS is expecting. The default is 'public'.

Trap

Destination

Enter the IP address of the NMS that you wish to send the traps to. If 0.0.0.0 is

entered, the P-660 will not send trap any NMS manager.

9. Using syslog

• P-660 Setup

• UNIX Setup

• ZyXEL Syslog Message Format

P-660 Setup

Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting

UNIX Syslog:

Active= Yes

Syslog IP Address= 192.168.1.33

Log Facility= Local 1

Types:

CDR= No

Packet triggered= No

Filter log= No

PPP log= No