User`s manual

P-660 Series Support Notes

device filters=

Output Filter Sets:

protocol filters=

device filters=

Menu 11.1:

Menu 11.1 - Remote Node Profile

Rem Node Name= LAN Route= IP

Active= Yes Bridge= No

Encapsulation= PPP Edit PPP Options= No

Incoming: Rem IP Addr= ?

Rem Login= test Edit IP/IPX/Bridge= No

Rem Password= ********

Outgoing: Session Options:

My Login= testt Edit Filter Sets= Yes

My Password= *****

Authen= CHAP/PAP

Press ENTER to Confirm or ESC to Cancel:

Menu 11.5:

Menu 11.5 - Remote Node Filter

Input Filter Sets:

protocol filters=

device filters=

Output Filter Sets:

protocol filters=

device filters=

SMT will also prevent you from entering a protocol filter set configured in Menu 21

to the device filters field in Menu 3.1, 11.5, or entering a device filter set to the

protocol filters field. Even though SMT will prevent the inconsistency from being

entered in ZyNOS, it is unable to resolve the intermixing problems existing in the

filter sets that were configured before. Instead, when ZyNOS translates the old

configuration into the new format, it will verify the filter rules and log the

inconsistencies. Please check the system log (Menu 24.3.1) before putting your device

into use.

In order to avoid operational problems later, the P-660 will disable its

routing/bridging functions if there is an inconsistency among its filter rules.

Filter Examples

1. A filter for blocking the web service