User`s manual

P-660 Series Support Notes

• Rule 3 (Many-to-One type) to map the other clients to IGA3.

• Rule 4 (Server type) to map a web server and mail server with ILA3

(192.168.1.20) to IGA3. Type Server allows us to specify multiple servers, of

different types, to other machines behind NAT on the LAN.

Step 1:

In this case, we need to configure Address Mapping Set 1 from Menu 15.1-Address

Mapping Sets. Therefore we must choose the Full Feature option from the NAT

field in menu 4 or menu 11.3, and assign IGA3 to P-660 WAN IP Address.

Menu 4 - Internet Access Setup

ISP's Name= CHT

Encapsulation= PPPoE

Multiplexing= LLC-based

VPI #= 0

VCI #= 33

ATM QoS Type= CBR

Peak Cell Rate (PCR)= 0

Sustain Cell Rate (SCR)= 0

Maximum Burst Size (MBS)= 0

My Login= N/A

My Password= N/A

ENET ENCAP Gateway= N/A

IP Address Assignment= Static

IP Address= IGA3

Network Address Translation= Full Feature

Address Mapping Set= 1

Press ENTER to Confirm or ESC to Cancel:

Step 2:

Go to menu 15.1 and choose 1 (not 255, SUA this time) to begin configuring this new

set. Enter a Set Name, choose the Edit Action and then select 1 from Select Rule

field. Press [ENTER] to confirm. See the following setup for the four rules in our case.

Rule 1 Setup: Select One-to-One type to map the FTP Server 1 with ILA1

(192.168.1.10) to IGA1.

Menu 15.1.1.1 - - Rule 1

Type: One-to-One

Local IP: