User`s manual

P-660 Series Support Notes

Global End

This is the ending global IP address (IGA). N/A

Type This is the NAT mapping types. Many-to-One and Server

Please note that the fields in this menu are read-only. However, the settings of the

server set 1 can be modified in menu 15.2.1.

Now let's look at Option 1 in Menu 15.1. Enter 1 to bring up this menu.

Menu 15.1.1 - Address Mapping Rules

Set Name= ?

Idx Local Start IP Local End IP Global Start IP Global End IP Type

--- --------------- --------------- --------------- --------------- ------

10.

Action= Edit , Select Rule= 0

Press ENTER to Confirm or ESC to Cancel:

We will just look at the differences from the previous menu. Note that, this screen is

not read only, so we have extra Action and Select Rule fields. Not also that the [?] in

the Set Name field means that this is a required field and you must enter a name for

the set. The description of the other fields is as described above. The Type, Local and

Global Start/End IPs are configured in Menu 15.1.1 (described later) and the values

are displayed here.

Field Description Option

Set Name

Enter a name for this set of rules. This is a required field. Please

note that if this field is left blank, the entire set will be deleted.

Rule1

Action

They are 4 actions. The default is Edit. Edit means you want to edit

a selected rule (see following field). Insert Before means to insert a

new rule before the rule selected. The rule after the selected rule will

then be moved down by one rule. Delete means to delete the

selected rule and then all the rules after the selected one will be

advanced one rule. Save Set means to save the whole set (note when

you choose this action the Select Rule item will be disabled).

Edit

Insert Before

Delete

Save Set

Select Rule

When you choose Edit, Insert Before or Save Set in the previous

field the cursor jumps to this field to allow you to select the rule to

apply the action in question.