User`s manual

P-660 Series Support Notes
35
All contents copyright © 2005 ZyXEL Communications Corporation.
Win2k Terminal Server None 3389/server IP
Remote Anything None 3996 - 4000/client IP
Virtual Network Computing
(VNC)
None
5500/client IP
5800/client IP
5900/client IP
AIM (AOL Instant Messenger) None for Chat and IM None for Chat and IM
e-Donkey None 4661 - 4662/client IP
POLYCOM Video
Conferencing
None Default/client IP
iVISTA 4.1 None 80/server IP
Microsoft Xbox Live
7
None N/A
1
Since SUA enables your LAN to appear as a single computer to the Internet, it is not
possible to configure similar servers on the same LAN behind SUA.
2
Because White Pine Cu-SeeMe uses dedicate ports (port 7648 & port 24032) to
transmit and receive data, therefore only one local Cu-SeeMe is allowed within the
same LAN.
3
In SUA mode, only one local NetMeeting user is allowed because the outsiders can
not distinguish between local users using the same internet IP.
4
Certain Quake servers do not allow multiple users to login using the same unique IP,
so only one Quake user will be allowed in this case. Moreover, when a Quake server
is configured behind SUA, P-660 will not be able to provide information of that
server on the internet.
5
Quake II has the same limitations as that of Quake I.
6
P-660 support MSN Messenger 4.6/ 4.7/ 5.0 video/ voice pass-through NAT since
new firmware version. In addition, for the Windows OS supported UPnP (Universal
Plug and Play), such as Windows XP and Windows ME, UPnP supported in P-660 is
an alternative solution to pass through MSN Messenger video/ voice traffic. For more
detail, please refer to UPnP application note.
7
P-660 support Microsoft Xbox Live since the new firmware version. If your P-660
firmware is too old to support such function, you may have a work-around solution,
please refer to ZyXEL website -> Support -> Xbox Live service
http://www.zyxel.com/support/xbox.htm
Configurations
For example, if the workstation operating Cu-SeeMe has an IP of 192.168.1.34, then
the default SUA server must be set to 192.168.1.34. The peer Cu-SeeMe user can
reach this workstation by using P-660's WAN IP address which can be obtained from
menu 24.1.
Menu 15.2.1 - NAT Server Setup (Used for SUA Only)
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 192.168.1.34
2. 0 0 0.0.0.0